A sunny windowsill rarely grows sturdy seedlings. Here is how to choose a grow light, from fixture types and spectrum labels to hanging height, timers and what justifies the extra cost.
In brief
- Window light is rarely enough: a tomato seedling may need just five hours of full sun but roughly 22 hours under a fluorescent tube for the same daily light.
- Run grow lights 14 to 16 hours a day on a timer, with 8 to 10 hours of darkness for respiration.
- Fluorescent tubes should hang two to four inches above seedlings; LED panels usually sit 12 to 18 inches off, and too close can burn leaves.
- Lumens measure brightness for human eyes, not plants; PAR or PPFD figures are the numbers that matter, and light fades quickly with distance.
- Standard shop LEDs and cool white fluorescent tubes work fine for seed starting; special grow lights are not required.
Starting seeds indoors stretches the season, opens up more varieties than any store shelf and cuts the cost of transplants. The catch is light. Most homes cannot supply what seedlings need from a window alone, and a basic grow light setup is usually the difference between stocky plants and pale, floppy ones. Here is what to look for before you buy.
Why a Sunny Windowsill Usually Isn’t Enough
Natural light from a window is seldom enough for strong seedlings. Plants on a sill stretch and lean toward the glass and rarely become sturdy transplants. Even lettuce, one of the few crops that can manage on a bright windowsill, benefits from added light.
The gap is intensity. The sun delivers far more light per second than any lamp, so the trade-off is hours: a tomato seedling may meet its daily needs in about five hours of full sun yet need roughly 22 hours under a fluorescent tube for the same total. Seedlings that fall short grow tall and thin, which is why the healthiest tomato at the nursery is usually the short, stocky one.
What Seedlings Need: Spectrum and Intensity
Think of a plant’s daily light requirement as a bucket to fill. Sun-loving crops have bigger buckets than shade plants, but a seedling has a smaller bucket than a mature plant, so the target is modest: about 8 to 14 moles of light per square meter per day, even for full-sun vegetables.
Extension services recommend 14 to 16 hours of light per day to keep seedlings compact and strong, and a steady schedule works better than mimicking lengthening spring days. Protect the other end too: seedlings need 8 to 10 hours of darkness for respiration.
Spectrum is simpler than the marketing suggests. Chlorophyll peaks in red and blue wavelengths, which is why many grow lights glow pink or purple, but ordinary cool white tubes grow stocky vegetable transplants and cost the least. Full-spectrum tubes add red light and build thicker stems, mainly useful for flowering houseplants kept indoors.
Fixture Types: Tubes, Panels and Strips
The classic choice is a four-foot shop light with two T-8 fluorescent tubes. The T-number gives tube diameter: multiply it by one eighth of an inch, so a T-8 is one inch across. T-8 fixtures replaced older T-12 styles and use less energy. T-5 tubes cost more and typically push faster growth, but they need their own fixture type.
Skip incandescent bulbs: they give off more heat than light, mostly red, and will not produce good transplants on their own.
LEDs are the other main option. They cost more upfront but use less energy, last longer and run cool enough for a shelf unit in a spare room. Standard shop LED fixtures work fine; lights marketed as grow lights are not required for seed starting.
| Fixture type | Cost picture | What to know |
|---|---|---|
| Incandescent bulbs | Cheap to buy, wasteful to run | More heat than light, mostly red; poor on their own |
| T-8 fluorescent shop light | Inexpensive | Energy efficient; tubes dim about 10 percent after 7,000 hours |
| T-5 fluorescent | Higher upfront | Faster growth; needs its own fixture type |
| LED shop light or panel | Higher upfront, cheapest to run | Runs cool and lasts long; standard shop LEDs work fine |
Reading the Label: Lumens, Kelvin and PAR
Most listings lead with lumens, but lumens measure brightness as the human eye sees it and do not translate directly to plant growth. Kelvin describes color: a 2700K bulb is warm white, weighted toward red, while a 6000K bulb is daylight, weighted toward blue. CRI, or color rendering index, rates how naturally colors appear under the light, and closer to 100 is better.
The plant-relevant measure is PAR, reported as PPFD: usable photons hitting a square meter each second, in micromoles per square meter per second. Better fixtures publish PAR or PPFD figures. If a listing gives only lumens, online calculators and phone light meter apps can estimate the rest. Light also fades quickly with distance, so check the maker’s spacing guidance.
Placement, Timers and Airflow
Height depends on the fixture. Fluorescent tubes should stay two to four inches above seedlings; LED panels usually sit farther off, often 12 to 18 inches, and too close or too bright can burn or spot leaves, so follow the product’s guidance. Use adjustable mounts and raise the lights as plants grow.
Plug everything into a simple outlet timer set for 14 to 16 hours daily, say 6 am to 10 pm. A timer keeps the schedule consistent and beats switching lights by hand.
Airflow helps too. A small fan on low speed, blowing across the trays, discourages fungal disease and strengthens stems, and careful watering matters since overwatering is one of the most common seed starting mistakes.
Try this: Set the timer once and leave it: 14 to 16 hours on, 8 to 10 off. Seedlings need that dark period for respiration.
What’s Worth Paying For
For most home gardeners, the easiest path is to set up a sensible system and watch the plants. Stretched, pale seedlings need more light, and there are three levers: brighter, closer or longer. A 54-watt fluorescent tube leaves room to grow, while a 32-watt tube may need to run extremely long to match it.
Spend the savings elsewhere. Use a sterile seed starting mix and clean containers, since dense or contaminated medium invites disease. Fertilize only after the first true leaves appear, diluted to half strength. Then harden seedlings off over about a week, starting in partial shade and increasing sun exposure over 7 to 10 days.
A cool white shop light and a timer cover vegetable and flower seedlings well, and LEDs earn their higher price if lights will run for months or year-round. Fluorescent tubes are consumables: T-8s lose about 10 percent of their brightness after 7,000 hours, so replace aging tubes when seedlings under them start stretching.
A grow light is a small piece of a larger budget. Our guide to the real cost of starting a vegetable garden breaks down where the money goes in a first season, and if you are planning beds for those transplants, see how much a raised bed garden costs.
Reader questions
Do I need special grow lights to start seeds?
No. Extension guidance says standard shop LED or fluorescent fixtures work fine. Ordinary cool white tubes grow stocky vegetable transplants, and full-spectrum tubes mainly matter for flowering houseplants kept indoors.
How long should seed starting lights stay on each day?
Fourteen to sixteen hours on a timer, with 8 to 10 hours of darkness. Keep the schedule consistent through the weeks seedlings are indoors.
Why are my seedlings tall, thin and flopping over?
That is a light shortage. There are three ways to add light: a brighter fixture, a closer one or longer run time. Watch the plants and adjust.
When can seedlings move outside?
After your last frost, and only after hardening off over about a week. Start in partial shade and increase sun exposure over 7 to 10 days.
This article is general information, not financial, legal or tax advice. Programs, incentives and rules change, so check current details with official sources and qualified professionals before you decide.
