White electrical outlet with two round sockets set into a dark brown wood-paneled wall.

Buying a Home Battery for Backup Power: A Buyer’s Guide

A home battery can keep the fridge, lights and internet on during an outage, but it takes planning and real money to get right. Here is how to size a system, compare costs and question installers.

In brief

  • A typical home battery holds about 13.5 kilowatt-hours, enough for a refrigerator, lights and a router, but not central air conditioning or an electric oven.
  • Industry estimates put a 13.5 kilowatt-hour installed system between roughly $10,000 and $15,650 before incentives.
  • When the grid fails, solar panels on their own switch off for safety; a battery keeps selected circuits running and can recharge from the sun if set up for it.
  • No storage system returns all the energy put into it, so some electricity is lost each time the battery charges and discharges.
  • Get written, itemized quotes from several installers and compare the price per kilowatt-hour of storage, not just the total.

A home battery stores electricity from the grid or from rooftop panels and hands it back when you need it, whether that is during an outage or when grid prices climb. Manufacturer marketing makes the setup sound simple, but the details of capacity, power output and contract terms decide whether you get the backup you expect. This guide covers what a battery can realistically do, what it costs and what to ask before signing.

What a Home Battery Can and Cannot Power

Day to day, the battery fills up quietly in the background. When the utility supply fails, an automatic transfer switch cuts your house off from the utility lines so the battery’s output flows only to you, and the system reconnects once service is restored.

Only the circuits wired into the battery system stay live, and picking which ones make the cut is a conversation with your installer. Typical selections include the refrigerator, a few lighting circuits and the router that keeps you online. A single unit cannot carry a whole house. Central air conditioning, an electric dryer and an electric oven pull large amounts of power quickly, so backing up everything takes more than one battery and considerably more money.

Two numbers decide runtime: the kilowatt-hours stored and the rate at which you use them. Keep the fridge, some lights and a phone charger going and the charge stretches far further than it does with an oven in the mix. If keeping food cold, the lights on and your phone charged is the goal, one battery can do a lot. If you want the air conditioner running through a summer outage, plan for a bigger system and a bigger budget.

Capacity, Power and Other Specs That Matter

Spec sheets pack in numbers, but a few carry most of the weight.

Spec What it tells you
Capacity (kWh) The total energy stored. One kilowatt-hour runs a 1,000-watt appliance for one hour.
Power rating (kW) How much energy the battery can deliver at once.
Efficiency Some energy is lost every time the battery charges and discharges.
Scalability Whether you can add more battery units later.

Energy capacity and power capacity do different jobs, and both matter. A battery with a 5 kW continuous power rating can run lights, a refrigerator and most small appliances at the same time, but heating, cooling and cooking appliances take more. Systems with higher output ratings generally cost more.

For sizing context, Berkeley Lab’s data found the median home battery installed alongside solar in 2025 held 13.5 kilowatt-hours. Small systems of around 10 kilowatt-hours suit one to two-bedroom homes, while larger homes may need 30 kilowatt-hours or more.

Ask an installer to walk through your actual usage rather than sizing by square footage. A system matched to the circuits you care about costs less than one sized for a house you never intend to back up fully.

Standalone Battery or Battery Plus Solar?

Batteries do not need solar to work. A standalone battery charges from the grid and covers your backed-up circuits during an outage. That is the simpler and cheaper path if your main goal is backup power.

Solar changes the picture in two ways. First, panels that are not paired with a battery switch off during an outage. That is a safety rule, not a flaw: grid-tied systems must not push electricity onto lines that repair crews may be working on. A battery solves the problem by isolating your house first. Second, with solar and the right setup, the panels can recharge the battery on sunny days during an outage. Over a long outage, that combination can keep supplying electricity even after dark, and unlike a conventional generator it needs no fuel deliveries.

Pairing also helps on ordinary days. Panels usually produce the most power in the afternoon, while household use tends to rise in the evening, so a battery lets you bank midday solar and draw it down after sunset instead of buying from the grid.

The trade-off is cost. Adding batteries can roughly double the price of a solar project, and one industry analysis notes that retrofitting a battery onto an existing system costs more than installing everything together. A battery is most likely to make financial sense if you face frequent blackouts, your utility pays little or nothing for solar you export, or your state offers strong storage incentives. Adoption is climbing for those reasons: roughly 12 percent of residential and commercial solar installations included batteries in 2023, and the Solar Energy Industries Association estimates that share will reach 28 percent by 2028.

If you are considering panels too, start with our guide to rooftop solar basics, since roof condition, orientation and shade all affect how much a paired system can do.

What Batteries Cost and What Incentives Apply

Costs vary widely by brand, size and state, so comparing the price per kilowatt-hour of storage is the fairest way to evaluate quotes. Industry estimates put average costs between $400 and $750 per kilowatt-hour.

For a common 13.5 kilowatt-hour system, installed prices in industry estimates range from about $10,000 to roughly $15,650 before incentives. The components behind those totals typically look like this:

  • The battery itself: most home batteries cost about $5,000 to $7,000 each, and some installations use more than one
  • Labor and overhead: about $2,000 to $3,500 with professional installation
  • Electric panel upgrade: sometimes needed, especially in older homes, at $1,000 to $2,500 on average
  • Permitting: usually a few hundred dollars, varying by jurisdiction
  • Solar integration: connecting to existing panels can add $2,000 to $5,000 for an extra inverter and wiring

Incentives can change the math substantially. A federal tax credit covered up to 30 percent of the cost of a solar power system for 2024, and rules for storage incentives vary by state and change over time. Check current IRS guidance and your state energy office before counting on any credit, and make sure your contract states who claims it.

Warranty, Lifespan and Degradation Terms to Check

Like all batteries, home batteries wear out. Manufacturers of lithium iron phosphate batteries, a common chemistry for home storage, design for lifespans of roughly 5 to 15 years or several thousand full charge cycles, with actual lifespan depending on usage patterns and operating conditions.

Some manufacturers back their products with 10-year warranties. The length matters less than what the warranty actually promises, so read it before you commit. Three things to look for:

  • Cycle or throughput limits. A warranty that ends after a set number of charge cycles can expire sooner than the calendar suggests if the battery cycles daily.
  • Capacity guarantees. Batteries lose some ability to hold charge over time. Check what percentage of original capacity the warranty promises to maintain, and what happens if it falls short.
  • Labor coverage. Some warranties cover the hardware only, leaving you to pay for the labor of removing and reinstalling a failed unit.

Questions to Ask Before You Sign an Install Contract

Be careful: Collect written, itemized quotes from multiple installers before committing, and judge them by the price per kilowatt-hour of storage rather than the headline total. Look up each installer’s license with your state licensing board and review complaint records held by consumer protection offices before signing anything.

Bring this list to every consultation:

  • Which circuits will be backed up, and is that list something we agree on?
  • What is the battery’s capacity in kilowatt-hours and its continuous power rating in kilowatts?
  • Can the battery recharge from solar during an outage, or does that require additional equipment?
  • Does my electrical panel need an upgrade, and is that cost included in the quote?
  • What are the warranty’s term, cycle limits and guaranteed capacity, and does it cover labor?
  • Who handles permitting, and who claims any federal, state or utility incentives?
  • Can I add another battery later if my needs grow, and what would that cost?
  • What is the full installed price, including hardware, labor, wiring and permits?

Because battery storage is often sold alongside solar, many of the contract pitfalls are the same. Our checklist on what to check before you sign a solar lease covers pressure tactics, long contracts and transfer questions that apply to battery deals as well.

One last thought on heavy loads: if backup power for heating and cooling is a priority, efficiency upgrades such as a heat pump can reduce the energy you need during an outage. Our guide to heat pumps explains how they work and which homes they suit.

A home battery is best treated as a backup purchase first and an investment second. Size it to the circuits that matter to you, compare per-kilowatt-hour pricing across quotes, and put every warranty and incentive promise in writing before you sign.

Reader questions

Do I need solar panels to use a home battery?

No. Batteries can charge from the grid and supply your selected circuits during an outage. Pairing one with solar lets the panels recharge the battery during a longer outage, if the system is configured for it.

How long can a home battery power my house?

It depends on the battery’s capacity in kilowatt-hours and how much power you draw. A fridge and a few lights stretch a 13.5 kilowatt-hour battery much further than an oven does.

Will a battery pay for itself?

It is most likely to make financial sense if you have frequent outages, your utility pays little for excess solar you export, or your state offers strong battery incentives. Otherwise, treat it mainly as a backup purchase.

What size battery does a typical home need?

A small system of around 10 kilowatt-hours can cover essentials for a one to two-bedroom house, while larger homes may need 30 kilowatt-hours or more. Your installer should size the system to your actual usage.

This article is general information, not financial, legal or tax advice. Programs, incentives and rules change, so check current details with official sources and qualified professionals before you decide.


Filed in

· Written by