A heat pump moves heat instead of making it, which is why it can keep a home warm with far less electricity than baseboard heaters.
In brief
- Heat pumps move heat rather than generate it, so one system can both heat and cool a home.
- The Department of Energy says a heat pump can reduce electricity use for heating by approximately 65% compared with electric resistance heating such as baseboard heaters.
- The main types are air-source, either ducted or ductless, and geothermal, also called ground-source.
- Compare efficiency using SEER2 for cooling and HSPF2 for heating; higher numbers mean more efficient equipment.
- The federal tax credits that covered heat pumps don’t apply to equipment placed in service after 2025, so check state and utility programs instead.
Heat pumps have gone from niche to mainstream in American homes. They can replace both a furnace and an air conditioner, and they often use much less energy than electric heating. Here’s how they work and what to weigh before you buy one.
How a heat pump works
A refrigerator moves heat out of its insulated box and releases it into your kitchen. A heat pump does the same thing for a whole house, in either direction.
- In winter, it pulls heat from the outdoor air, or from the ground, and moves it indoors. Even cold air contains heat that a heat pump can capture.
- In summer, it reverses and moves heat from inside the house to the outdoors, just like an air conditioner.
Because it moves heat rather than creating it from fuel or electric resistance, a heat pump can deliver more heat energy than the electricity it uses. The Department of Energy says a heat pump can reduce electricity use for heating by approximately 65% compared with electric resistance heating such as electric furnaces and baseboard heaters.
The main types
| Type | How it works | Often suits |
|---|---|---|
| Ducted air-source | An outdoor unit connects to an indoor air handler and existing ducts | Homes with ductwork, replacing a central AC or furnace |
| Ductless mini-split | An outdoor unit serves one or more wall- or ceiling-mounted indoor units | Homes without ducts, additions, individual rooms |
| Geothermal (ground-source) | Exchanges heat with the ground through buried pipes | New builds and homes with suitable land; higher upfront cost |
Heat pump water heaters use the same principle to heat water and are worth comparing whenever a water heater needs replacing.
How they compare with other heating
Against electric resistance heat, such as baseboard heaters, the efficiency gain is large. Against a gas or oil furnace, the comparison depends on local energy prices, how cold your winters are and how well insulated your home is. A good installer should be able to estimate running costs for your situation, not just quote equipment.
Ratings to compare
- SEER2 measures cooling efficiency, and HSPF2 measures heating efficiency. These replaced the older SEER and HSPF ratings in 2023. Higher is better.
- ENERGY STAR certification identifies models that meet EPA’s efficiency criteria.
- Cold-climate performance data shows how much heat a model delivers at low temperatures. If you have harsh winters, ask for it.
Questions to ask installers
- Will you do a room-by-room load calculation before sizing the system? Oversized and undersized systems both perform poorly.
- Are my ducts in good enough condition, or will they need sealing or changes?
- What backup heat, if any, will the system use, and when will it switch on?
- Does my electrical panel have the capacity, or will it need an upgrade?
- What do the equipment and labor warranties cover, and for how long?
- Who handles permits and inspections?
Get written quotes from more than one licensed contractor so you can compare like with like.
Worth knowing: The federal Energy Efficient Home Improvement Credit and Residential Clean Energy Credit don’t apply to equipment placed in service after December 31, 2025, according to IRS guidance. Rebates may still be available from some states and utilities, so check with your state energy office and utility before you buy.
Pairing heat pumps with clean power
A heat pump uses electricity, so its environmental benefit grows as the grid gets cleaner, or if you generate some of your own power. Our guides to rooftop solar and community solar explain the options. If you’re also thinking about an electric car, our guide to home EV charging covers the electrical capacity questions that often come up at the same time.
Reader questions
Do heat pumps work in cold climates?
Many do. Models designed for cold climates keep heating at low outdoor temperatures, although their output and efficiency fall as it gets colder, and some systems use backup heat on the coldest days. Ask installers how a model performs at your area’s typical winter lows.
Can a heat pump replace my gas furnace?
Often, either completely or as part of a dual-fuel setup that keeps the furnace as backup. Whether it lowers your bills depends on local electricity and gas prices, your home’s insulation and the equipment you choose.
Do I need ducts?
No. Ductless mini-split systems connect one or more indoor units mounted on walls or ceilings to an outdoor unit. They suit homes without ductwork and single spaces such as additions.
Will I need an electrical upgrade?
Some homes do. DOE notes that a panel or wiring upgrade may be needed to support an electric heat pump. An installer or electrician can check your service before you commit.
This article is general information, not financial, legal or tax advice. Programs, incentives and rules change, so check current details with official sources and qualified professionals before you decide.
