Heating is the biggest line on most winter energy bills. These seven moves, backed by government estimates, cut the waste without sacrificing comfort.
In brief
- Heating makes up roughly 45% of average household energy expenses, and 10% to 20% of annual energy cost is wasted on drafts, leaks and outdated systems.
- Air sealing plus added insulation in attics and floors over crawl spaces and basements saves an estimated 15% on heating and cooling costs, according to the EPA.
- ENERGY STAR certified smart thermostats save about 8% of heating and cooling bills, roughly $50 per year on average.
- A federal tax credit covers up to 30% of what a homeowner spends to purchase and install an energy-efficient heat pump.
- A professional home energy audit may qualify for a 30% federal tax credit of up to $150.
Heating is the largest piece of most American household energy bills. The Department of Energy puts heating-related costs at roughly 45% of average household energy expenses, and ENERGY STAR estimates that heating and cooling together account for almost half the annual bill, more than $900 a year. A large share of that expense is waste you can cut with a weekend of low-cost work or a modest upgrade.
1. Seal Air Leaks Around Windows, Doors and Ducts
The Department of Energy estimates that 10% to 20% of the average home’s annual energy cost is wasted through drafts, air leaks around openings and outdated heating and cooling systems. Sealing is the cheapest fix on this list. Caulking and weatherstripping are two simple, effective techniques, and both are realistic do-it-yourself projects.
Work from the top down. Attics, basements and the edges of doors and windows are the most common leakage points. Ducts deserve attention too, especially where they run through unheated spaces: gaps where ducts, pipes and vents meet walls are prime escape routes for the warm air you paid for.
One caution. Do not over-seal. A house still needs ventilation to move moisture out and keep mold, gases from stoves and fireplaces, and carbon monoxide from accumulating. If your sealing project is extensive, have a professional confirm the home still breathes.
2. Add Insulation Where It Pays Back Fastest
Air sealing and insulation work as a pair, and together they carry the biggest documented payoff on this list. The EPA estimates homeowners save an average of 15% on heating and cooling costs, about 11% on total energy costs, by air sealing and adding insulation in attics, floors over crawl spaces and basements.
Start with the attic. Attics and garages are especially prone to heat transfer, and the attic is where homes most often lose energy. Insulation materials, typically fiberglass, cellulose or foam, are rated by R-value, a measure of resistance to heat flow that depends on the material and its thickness. How much you need depends on your climate zone: northern zones with long, cold winters are heating dominated and call for more insulation than southern, cooling-dominated zones.
Even newer homes can benefit from upgrades, which the Department of Energy says can pay for themselves within a few years. Insulation and air sealing that meet the 2021 International Energy Conservation Code may also qualify for a federal tax credit, so keep your receipts.
Try this: Air sealing plus added attic insulation carries one of the clearest payoffs in home efficiency: the EPA estimates an average 15% cut in heating and cooling costs from these two projects alone.
3. Program a Thermostat Schedule That Actually Saves
A schedule only saves money if the temperature genuinely eases off when nobody is home or everyone is asleep. ENERGY STAR certified smart thermostats are built for exactly that: many learn your preferences, use geofencing to notice when you have left, and let you adjust settings remotely from a phone. On average they save about 8% of heating and cooling bills, roughly $50 a year, with greater savings possible depending on climate, occupancy and equipment.
Certified models enter a low-power standby mode when inactive, and some send monthly energy reports you can use to compare performance over time. Before buying, confirm the thermostat works with your heating and cooling system; for the most efficient equipment, a controller from the same manufacturer may be the better match. Utility rebates for certified models are available in many parts of the country.
4. Use Ceiling Fans and Vents the Right Way
Fans do not heat a room, but they help the air you have already paid to warm reach where people actually are. In winter, run ceiling fans on a low speed in reverse so warm air pooled near the ceiling circulates back down into the living space, then switch them off when you leave the room.
Keep supply vents and return grilles clear of furniture, rugs and heavy curtains so air moves freely through the system. Kitchen and bathroom exhaust fans deserve restraint as well: run them long enough to clear moisture and odors, but not so long that they pull heated air straight outside.
5. Service Your Furnace or Heat Pump Before Winter
Outdated heating systems are part of that national 10% to 20% waste estimate, and a system that has to fight leaky ducts and clogged airflow works harder than it should. A pre-winter service visit lets a technician clean and check the equipment, replace worn parts and catch safety problems such as carbon monoxide leaks before the heating season peaks.
Service also informs timing. If your furnace or heat pump is aging and repair quotes are stacking up, our timeline for when to repair or replace home appliances walks through the thresholds that separate a repair from a replacement. Ask the technician what a tune-up will actually change; if the honest answer is very little, put the money toward sealing and insulation instead.
6. Let Sunlight In and Curtains Do Night Work
Sunlight is free heat. On sunny winter days, open curtains and blinds on windows that face the sun and let the warmth build in the rooms you use. Once the sun goes down, close them again so the window coverings add a layer between warm indoor air and cold glass.
Curtains and drapes are among the lower-cost window treatments, alongside sealing behind window and door trim and installing plastic film on windows for the winter. None of these matches the performance of new efficient windows, but they cost a fraction as much and can be done in an afternoon, with or without a contractor.
7. Consider Bigger Upgrades: Heat Pumps and Efficiency Rebates
If your heating system is old and inefficient, larger projects start to pay. The Department of Energy estimates that replacing an older system with a heat pump can avoid about 7.6 tons of carbon emissions per year, depending on what it replaces. Homeowners also qualify for a federal tax credit worth up to 30% of what they spend to purchase and install an energy-efficient air-source or geothermal heat pump. A heat pump also handles cooling, so the equipment earns its keep all year. Our guide to how heat pumps work covers the technology and which homes it suits.
Start big projects with a home energy audit, which pinpoints where your home loses energy and what to fix first. A professional audit can earn a 30% federal tax credit of up to $150. Costs and incentives vary by program; as one example, assessments through Wisconsin’s Focus on Energy typically run $500 to $700 and qualify participants for larger rebates, while income-eligible households in some states can have the full cost of upgrades covered. Check your utility and state programs for offers where you live.
Sealing leaks and setting a real thermostat schedule cost little and start saving the same week. Once heating is under control, hot water is the next household habit worth attention, so our guide to saving water at home is a sensible next read. And when you are ready to think about where your power comes from, rooftop solar basics shows whether your home is a good fit for panels.
Reader questions
How much can air sealing and insulation really save?
The EPA estimates homeowners save an average of 15% on heating and cooling costs, or about 11% on total energy costs, by air sealing and adding insulation in attics, floors over crawl spaces and basements.
Will a smart thermostat work with my heating system?
Not always, so check compatibility before buying. For the highest efficiency equipment, a controller from the same company may be the better choice, and many utilities offer rebates on certified models.
What should I do first if my budget is tight?
Start with caulking and weatherstripping around doors and windows. Both are inexpensive, effective air-sealing techniques that most people can do without a contractor.
Are heat pumps a realistic option for older homes?
They can be, and a federal tax credit covering up to 30% of purchase and installation costs helps with the price. A home energy audit or a qualified contractor can tell you whether your home is a good candidate.
This article is general information, not financial, legal or tax advice. Programs, incentives and rules change, so check current details with official sources and qualified professionals before you decide.
