Close-up of a white radiator thermostat dial with the numbers 1 and 2 visible against a blurred background.

6 Ways to Save With Time-of-Use Electric Rates

When the price of electricity depends on the hour, small changes in timing can mean real savings. Here is how to make a time-of-use rate work for your household instead of against it.

In brief

  • Time-of-use rates charge more during weekday peak hours and less overnight; peak rates can be two to three times higher than off-peak rates.
  • The Energy Information Administration says 62 percent of US residential customers have access to time-of-use programs, but only 7.3 percent are enrolled.
  • Off-peak hours are typically overnight, around 9 p.m. to 6 a.m., and weekends and holidays are usually off-peak all day.
  • Moving laundry, dishwashing, EV charging and heating or cooling out of peak hours is the fastest way to make the rate work in your favor.
  • If a time-of-use plan raises your bill, compare bills from the same season, then ask your utility about switching back to the standard rate.

More utilities are moving households onto time-of-use electricity rates, which charge different prices depending on when you use power. The Energy Information Administration reports that 62 percent of US residential customers have access to these programs, but only 7.3 percent are enrolled. If your utility offers one, or is making one the default, the schedule can either trim your bill or inflate it. The difference comes down to when you run things.

What Time-of-Use Rates Are and Why Utilities Use Them

For decades, most households paid one flat price for every kilowatt-hour, adjusted once or twice a year. Time-of-use rates replace that with a schedule: a high price during peak hours when demand is highest, a low price overnight, and sometimes a middle tier in between. Peak rates can run two or three times higher than off-peak rates, but the expensive hours are a small slice of the week. At PSEG Long Island, for example, off-peak hours cover more than 88 percent of the hours in a year.

The pricing reflects real costs. When everyone cooks dinner and runs the air conditioner at once, the grid calls on less efficient, more expensive power plants and wholesale prices climb. Charging more at peak and less overnight is meant to even things out, easing stress on the grid. It matters more as demand grows: the EIA forecasts US electricity consumption to rise at an average of 1.7 percent per year from 2020 through 2026, after nearly two decades of flat demand.

First, Check Whether a Time-of-Use Plan Actually Fits Your Household

Before optimizing anything, decide whether the plan suits your household at all. If most of your heavy usage naturally falls in the evening, shifting it may be hard. Some utilities are blunt about this: Unitil tells customers that if shifting usage away from 3 to 8 p.m. on weekdays is not realistic, staying on the standard rate is the better option.

Two things help you decide. Many utilities offer rate comparison calculators that apply your actual usage to both rates, so ask for one. Most utilities with smart meters also show hourly usage in your online account. If a large share of your consumption already falls outside the peak window, switching is probably a good bet.

1. Shift Big Appliances Away From Peak Hours

Laundry, dishwashing and baking are the easiest wins because they can happen almost any time. Run the dishwasher after 9 p.m. or first thing in the morning instead of right after dinner. Wash clothes on weekends, which many plans treat as off-peak all day. Dryers and ovens are among the hungriest appliances in the house, so moving them out of the peak window can matter more than any other single change.

Exact hours vary. Off-peak is typically overnight, around 9 p.m. to 6 a.m., and some utilities also discount early morning or midday. SDG&E in San Diego prices weekdays from 10 a.m. to 2 p.m. as its cheapest window year-round, reflecting abundant midday solar. Confirm your own schedule rather than assuming.

Example utility and plan Weekday peak window
PSEG Long Island, Time-of-Day rate 3 to 7 p.m.
Unitil, New Hampshire residential 3 to 8 p.m.
PG&E, SCE and SDG&E, California 4 to 9 p.m.

Try this: Peak windows differ by utility and can shift with the seasons, and in New England they often extend later into the evening. Check your utility’s current rate sheet before you set any timers.

2. Put Timers and Schedules to Work on Charging and Heating

Anything that heats on a schedule can move to cheaper hours without you lifting a finger. Utilities suggest setting timers on thermostats, water heaters and pool pumps so they run during off-peak hours. A smart thermostat makes the scheduling simple, and our guide to buying a smart thermostat that actually saves money covers what to look for. Electric water heaters pair well with a basic timer: heat the tank overnight or mid-morning and you will rarely notice the difference.

EV owners have the most to gain, because a car charger is often one of the largest loads in the house. Nearly every time-of-use plan prices overnight charging near the bottom, and some utilities offer a separate, cheaper EV-only rate. Most chargers and cars let you set a charging window so the car fills after the peak ends. Our guide to charging an electric car at home explains the equipment side.

3. Pre-Cool and Pre-Heat Before Peak Prices Kick In

Heating and cooling are the biggest loads in most homes, and they are flexible in a way a refrigerator is not. In summer, cool the house a little extra in the late morning or early afternoon, before the peak window opens, then let the temperature drift upward through peak hours. In winter, warm the house before the evening peak and let it drift down. The house itself acts as a buffer, so the equipment runs while electricity is cheap and rests while it is expensive.

How well this works depends on the building. A well-insulated home holds its temperature longer, which makes pre-conditioning more effective and cuts total energy use too.

4. Track Your Usage During the First Billing Cycle

Treat the first month or two on the new rate as an experiment. Pull up the hourly data in your utility account and look for three things: how much of your usage lands in peak hours, which appliances are responsible, and whether your habits have actually changed. Many accounts can overlay the rate periods on your usage, which makes the expensive hours obvious.

Small shifts add up because the peak window is short, often four or five hours a day. Moving two or three large loads out of it can cut a meaningful share of what you pay. Compare the actual bill with a similar month the year before, since weather alone can swing the total.

5. Mind the Seasons and the Calendar

Time-of-use plans are not the same all year. Summer rates are often higher than winter rates because air conditioning pushes up demand, which makes off-peak timing even more valuable from June through September. Weekends and holidays are usually off-peak around the clock, so batch your laundry on Saturday when you can. Peak windows themselves can change with the season, so reread the rate sheet a couple of times a year.

6. Stack Demand Response Programs on Top

A time-of-use rate is one way utilities reward shifting power use, and demand response programs often work alongside them. Demand response pays customers to temporarily reduce demand at specific times, sometimes by letting the grid operator briefly cycle equipment such as air conditioners and water heaters. About 9.3 million US customers took part in these programs in 2014, 93 percent of them residential, and the average residential participant saved about 100 kilowatt-hours a year and received about $40.

If your utility offers a program that adjusts your thermostat or water heater during peak events in exchange for bill credits, it can stack on top of the savings from shifting your own usage. Read the terms so you know how often events can happen and whether you can opt out.

What to Do If Your Bill Goes Up Anyway

If a full billing cycle on the new rate costs more than before, act rather than shrugging. Compare bills for the same season in different years, since weather can mask or mimic a rate effect. Then check the bill itself: on many bills, the supply charge and the delivery charge are listed separately, and the time-of-use schedule may apply to only one of them.

If the plan is optional, ask your utility to switch you back to the standard rate; most make that a phone call or a few clicks. If the plan is mandatory, the fixes above usually close the gap, especially moving EV charging and climate control out of the peak window. Households with rooftop panels can also offset evening rates directly by using their own power before drawing from the grid.

Shifting when you use power pairs naturally with other changes around the house. Our guide to rooftop solar basics explains how to tell whether your home is a good fit for panels, and 7 ways to cut your heating bills covers the fixes that shrink the biggest load on a winter bill.

Reader questions

What are typical peak hours for time-of-use electricity rates?

They vary by utility, but weekday peaks commonly fall in the late afternoon and evening, such as 4 to 9 p.m. in California or 3 to 7 p.m. on Long Island. Weekends and holidays are usually off-peak all day.

Can I leave a time-of-use plan if it costs me more?

Often yes. If the plan is optional, most utilities will switch you back to the standard flat rate on request. If your utility requires it, shifting large loads out of the peak window is the main fix.

Do time-of-use rates help or hurt EV owners?

They usually help, because overnight charging lands in the cheapest hours, and some utilities offer a separate, cheaper EV-only rate. Set your charger or car to start after the peak window ends.

Why are utilities pushing these rates now?

Electricity demand is rising again after nearly two decades of flat consumption, and the EIA forecasts average growth of 1.7 percent per year from 2020 through 2026. Time-based pricing helps even out demand and eases stress on the grid.

This article is general information, not financial, legal or tax advice. Programs, incentives and rules change, so check current details with official sources and qualified professionals before you decide.


Filed in

· Written by